(HIGH PERFORMANCE LATEX MODIFIER FOR CEMENT)
It is a synthetic latex which when added to mortar and concrete
mixes enhances their basic properties. It gives the cured compound
exceptional properties: including excellent adhesion of mortar to
brick, concrete, ceramic tiles etc., good adherence to common building
materials such as timber, the majority of metals and also expanded
polystyrene foam and rigid polyurethane foam.
Chembond gives a marked improvement in tensile strength, impact
and abrasion resistance. Chembond mortar has excellent UV, chemicals
and water resistance.
- Suitable use as adhesive binder for MONOTEX render system.
- Repair of concrete and masonry surfaces.
- Cement grouting of ceramic tiles.
- Re-surfacing or leveling of concrete floors and slabs.
- Bonding agent for Mixkote chemical waterproofing products.
- Patching and repair of swimming pools and water tanks.
- Grouting of penetrations and bedding of machine bases etc.
- Precast panel patching, permanent bonding or cementitious
coatings, textures and plaster.
100W (A TWO-COMPONENT WATER DISPERSABLE EPOXY RESIN COATING)
It is based on water dispersable epoxy resin system supplied in
preweighed packs. It can be applied on to moist surfaces with good
adhesion, practically no smell, being water based it contains no
organic solvent, minimum skin irritation, tools and hand can be
cleaned with water before cure. The coating once cured is dustproof,
easily cleaned and resistant against penetration of chemicals and
Epikote 100W is practically suited to coat
or impregnate walls, plaster, concrete floors, asbestos cement
in hospitals, garages, dairies, butcheries, kitchen, nuclear
power plants and general chemical industries.
It is a pigmented, two components solvent free , flexible polyurethane topcoat for car park system.
It provides an flexible, slip resistance, chemical resistance and hard wearing car park floor finish.
A three pack, easy to apply, epoxy resin self smoothing flooring system laid at 2-3mm in a range of color
to provide an easy to clean, chemical resistant and hard wearing floor finish. typical areas for use are dry
process manufacturing, packaging and warehousing subjected to intensive wheeled & fork lift traffic. Suitable for
AGV, Hovair and other robotic equipment trafficking.
A three pack, solvent free 4 - 6mm epoxy screed with either natural silica or coloured quartz and available in a range of colours.
to provide a heavy duty, chemical resistant ad hard wearing floor finish. Typical areas for use are wet and dry process areas where the floor is subjected to heavy traffic, impact and chemical spills. EPILOX 246EM has been widely used in car manufacturing plants.
246 (HEAVY DUTY, CHEMICAL RESISTANT, INDUSTRIAL FLOORING SYSTEM)
It is based on Epoxy Resins and specially selected fillers. Epilox
246 is a chemical resistant floor topping for the protection of
concrete, steel or any other solid surface whereas hard wearing,
acid, alkali and chemical resistance is requires. It is applied
in the minimum thickness of 2mm.
to apply at breweries, battery manufacturers, engineering
workshops, electronics industries, plating shops, power generation
rooms, computer rooms.
and operation theaters, commercial kitchens, dairy industries,
food and drinks industries, palm oil industries, rubber industries,
all warehouse / godowns etc.